Showing posts with label Garage. Show all posts
Showing posts with label Garage. Show all posts
Sunday, April 21, 2013
Garage Screens
Retractable screen on garage door. How genius is this!?!?
http://www.stoett.com/garage-retractable-screens/
Saturday, March 9, 2013
Clay Post to Bird Bath and Flowers
Clay Pots To Bird Bath And Flowers
I saw this all over FB but not giving credit to the creator or giving all the directions. SO, here are the directions and the credit @ the end of this persons creation. GREAT work they did!!!!
http://how-do-it.com/Unique_garden_landscaping_ideas_/
I saw this all over FB but not giving credit to the creator or giving all the directions. SO, here are the directions and the credit @ the end of this persons creation. GREAT work they did!!!!
http://how-do-it.com/Unique_garden_landscaping_ideas_/
Friday, March 8, 2013
Fishing Rod Storage Made Easy
FISHING ROD STORAGE MADE EASY
Needed parts
i) Length of 50mm PVC
ii)some drywall screws
iii)Hacksaw,5mm drill-bit,a drill and Phillips screwdriver
1)Get a length of 50mm diameter PVC and cut it into 15cm pieces
(Each rod needs 2 pieces )
2)Drill a 5mm hole in the centre of one side of each PVC piece (this is where you pass the Phillips screwdriver through)
3)Cut a 1cm wide slit down the side of the front PVC pieces (This makes it easy to add/remove the rods)
4)Put the Phillips screwdriver through the hole you drilled and add a drywall screw on top of it and screw it through the side of the PVC and into the ceiling beam do the same for the front piece
photo: Jacojvv
http://www.instructables.com/id/PVC-ROD-Rack/
Needed parts
i) Length of 50mm PVC
ii)some drywall screws
iii)Hacksaw,5mm drill-bit,a drill and Phillips screwdriver
1)Get a length of 50mm diameter PVC and cut it into 15cm pieces
(Each rod needs 2 pieces )
2)Drill a 5mm hole in the centre of one side of each PVC piece (this is where you pass the Phillips screwdriver through)
3)Cut a 1cm wide slit down the side of the front PVC pieces (This makes it easy to add/remove the rods)
4)Put the Phillips screwdriver through the hole you drilled and add a drywall screw on top of it and screw it through the side of the PVC and into the ceiling beam do the same for the front piece
Jacojvv over on instructables has a GREAT IDEA here!
photo: Jacojvv
http://www.instructables.com/id/PVC-ROD-Rack/
Subscribe to:
Posts (Atom)